draw 3d shapes for free

Download Article

Download Commodity

Shapes are some of the starting time things y'all probably learned to depict. With a little practise, you can brand those shapes appear 3-dimensional. In virtually cases, you'll merely need to draw a line that curves on your shape to create perspective. In one case y'all take the outline of a 3D shape, imagine where the light source is hit information technology and shade the opposite side heavily.

1. 1

   Make a circle using a pen or pencil. Draw the circle and so it's equally wide equally y'all'd like the sphere to be. Press lightly so you can easily get back and shade in the sphere. For a little help drawing a circle, trace something circular or use a compass.^[1]

2. 

   two

   Draw a curved line across a circumvolve to create a three-dimensional sphere. You can make the line curve upwards or down in the center of the circle to suggest the viewer is looking at the sphere from below or above. Curve the line as far up or down as y'all want, keeping in mind that a shallow curve gives yous a side-view perspective.^[two]

   • If you'd like to show fifty-fifty more 3-dimensional detail, describe a dotted or dashed line that curves across the circle in the opposite management of your line. The dotted line implies that y'all're looking behind the sphere.

   Advertisement

3. three

   Use heavy pressure to shade a sliver of the sphere's side and bottom. Decide where light hits your sphere and begin shading along the opposite side of the sphere where the shadow would fall. Then, apply a trivial less force per unit area as you shade in the curved center of the sphere. Use a light touch to shade just a little where the low-cal would hitting the sphere.^[3]

   • For instance, if low-cal hits the acme right of the sphere, press firmly along the bottom left portion of the sphere to make a shaded crescent.

   Advertizing

1. 

   one

   Depict two overlapping squares that are the aforementioned size. Make a simple foursquare that'south any size you like. Then, place your pencil in the eye of the square and sketch another square from this bespeak and then y'all have 2 squares that overlap slightly.^[4]

   • Information technology'due south of import to make the squares the same size or they won't form a cube when yous connect them.

2. 

   2

   Brand directly lines that connect the corners of the squares. Describe a straight line from 1 corner of a square to the matching corner of the other square. Echo this for each corner to create a cube.^[5]

   • Make the straight lines connecting each corner parallel to make the cube realistic.

   Tip: If you don't want all the lines to be visible, erase the 3 connecting lines that are in the heart of the square that'due south closest to you lot.

3. 3

   Shade one side of the cube dark and utilise light pressure to shade the other sides. Since i side of the cube volition be blocked from a light source, shade it in heavily then it's noticeably dark. Then, employ medium or light pressure to shade the top of the box and the other visible side of the cube.^{[half dozen]}

   • To make the cube even more realistic, depict a foursquare-shaped shadow coming from the dark side of the cube.

   Advertising

1. i

   Sketch a V shape using a pen or pencil. If yous can depict a triangle, you tin easily brand a cone. Draw a Five shape or sketch information technology upside down as though you're starting to draw a triangle without its base of operations.^[7]

   • Brand the V shape as large as you'd like the cone to exist.

2. 

   two

   Draw an oval at the base of operations of the V shape. Lightly sketch an oval shape that connects the 2 widest points of the V shape. This seals off the shape to create a three-dimensional cone.^[8]

   Tip: If you lot're making an upside-downwards V shape, you could shade in a shadow from the bottom of 1 side.

3. 3

   Darken 1 side of the cone and gradually shade to the opposite side. Rub the tip of your pencil back and along along 1 side of the cone until it's heavily shaded. Apply a little less force per unit area as you shade towards the middle of the cone and utilise a low-cal touch on the opposite side.^[9]

   • Add a little more shading along the bottom of the cone well-nigh the darker side of the cone.

   Advertisement

1. 1

   Make an equilateral triangle. Take a pencil and describe a triangle that has equal sides. An equilateral triangle also has 3 equal angles since the sides are the same length. If information technology helps, trace an equilateral triangle or employ a ruler and then you lot go exact measurements.^[10]

2. 

   2

   Sketch another triangle coming from 1 side of your equilateral triangle. Place your pencil at the tiptop of the equilateral triangle and make a straight line that comes down towards the side of the first triangle, only don't let it reach as far as the bottom of the first pyramid. Then, draw a straight line connecting the bottom of this line with the corner of the commencement pyramid.^[xi]

   • Brand the top angle of the side pyramid between twenty and twoscore degrees so your pyramid doesn't look unbalanced.

   Tip: If yous'd like to show the view inside the pyramid, draw a square using a dashed line along the base of the triangle. Make some other dashed line from the back corner of the foursquare to the summit of the pyramid.

3. iii

   Shade in ane side of the pyramid and go out the other side lighter. Make up one's mind where the light is hitting your pyramid and shade the contrary side until it'southward dark. For example, if the light is hitting the side of the pyramid, shade in the front end so it looks like it'due south in shadow.^[12]

   • If you'd like to include a shadow, shade in a triangular shape coming from the bottom of the pyramid.

   Advertisement

1. i

   Draw a triangle to make the front end of the prism. You lot can make the triangle whatsoever size y'all like. Consider making information technology large until yous become comfortable with cartoon prisms. Then, you tin can try making tiny triangular prisms.^[13]

   • You can make whatever type of triangle you like. Make an equilateral, isosceles, or a right triangle, for instance.

2. 

   two

   Create another triangle that's the same size as the starting time triangle. Place this identical triangle where you lot want the prism to stop. This triangle makes the dorsum face of the prism.^[14]

   • Ensure that the triangles aren't touching or it will be difficult to draw the remaining lines for the prism.

3. 

   iii

   Describe straight lines to connect each of the front triangle points with the back points. Identify your pencil on the pinnacle of the forepart triangle and draw a straight line to the top of the back triangle. Echo this for the other ii points of each triangle to create a prism.^[xv]

   Tip: If you'd similar the triangular prism to appear opaque, erase the center lines of the prism.

4. iv

   Shade in 1 side of the triangular prism. Think well-nigh how the light is hitting the prism and shade in the other side of the prism until it'due south dark. For example, if light is hitting the side of the prism, brand the front confront nighttime.^[16]

   • If you'd similar the light to hit the front of the prism, heavily shade in the side.

   Advertisement

Add New Question

• Question

  How tin I describe a rectangular prism?

  

  You tin make a rectangular prism by turning the squares in the cube instructions into rectangles.

• Question

  How practise I draw a pyramid?

  

  Look at the finished triangular prism. Remember, a triangular prism is a pyramid, don't let the names fool you!

• Question

  How do I draw a 3D pentagon?

  

  If you want it to be similar a rectangular prism, merely a pentagon, I recommend drawing the 2 pentagons then connecting the corners. The 2nd pentagon will exist slightly above and to the left of the outset, merely they volition still overlap.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Ad

• You can brand a rectangular prism by connecting ii squares with straight parallel lines.

• Use a ruler to make perfectly straight lines for your iii-dimensional shapes.

Thanks for submitting a tip for review!

Advert

Things You'll Need

• Sharp pencil
• Paper or drawing pad
• Colored pencils, optional

Nearly This Commodity

Article Summary X

To draw a 3D shape, start by drawing a foursquare in the center of a piece of paper. Then, draw some other foursquare above information technology and to the right. The lesser left of the second square should intersect the top correct of the first square, creating a smaller square between the two. Adjacent, connect the corners of the first square to the corners of the 2d square with directly lines. Finally, erase the inside lines then that you're left with a solid cube. For tips on how to draw other 3D shapes, like cylinders or pyramids, keep reading.

Did this summary help yous?

Thank you to all authors for creating a folio that has been read 167,471 times.

Did this article aid you?

ingallsroys1977.blogspot.com

Source: https://www.wikihow.com/Draw-3D-Shapes

Share this post